Cadence System Analysis
In load pull calculations, power amplifiers are going to need harmonic load pull analysis and load pull contours with wideband electromagnetic tuners.
RF Filter design and especially 5g RF filters in wireless communication systems are facing stress from MIMO technologies, EM analysis is a necessity.
MIMO technologies are rapidly evolving micro antenna designs in RF systems, and you'll need to stay on top of EM analysis to keep up with these technologies.
Designing tried-and-true 5g technologies, or new applications of mmWave 5g systems demands accurate and strong tools. 5g mmWave antenna design stops for nobody!
mmWave 5g designs, especially in RF and microwave systems, are looking at handling power amplifiers with crosstalk and transmission line voltage demands.
Whether aerospace or automotive radar systems design, trust the right tools to work through phased array antenna designs and GaN or GaAs technologies.
RF and Microwave system design for internet of things (IoT) devices will have you examining micro antenna designs, MIMO technologies, and EM simulations.
MIMO Phased array antenna designs in 5g RF systems are an evolving technology challenging systems designers everywhere with increasingly difficult EM analysis.
Work through radar system design with innovative frequency band, antenna design, modulation, and continuous wave type RF and microwave simulation.
In 5G RF planning or RF link analysis make sure to pay attention to propagation modeling as well as fade margin calculations to optimize your system.
An RFIC Power amplifier (PA) based on GaS or GaAn technologies can be hard to design, so too can added CMOS or SiC technologies increase difficulty.
Linking wireless RF transmitter and receivers requires strong signal processing and EM simulation tools to ensure design integrity.
When designing phased array antennas for your RF and microwve systems, measure MIMO and beamsteering technologies accurately with EM simulation tools.
RF down conversion is accomplished with low noise amplifiers (LNAs) and dielectric resonator oscillators (DRO), for MMIC/RFIC or field effect transistors (FETs).
5g RF filters and power amplifiers aid in the connectivity of wireless networks. Use strong EM tools and system design environments dedicated to 5g technology.