Passive Device Synthesis and Optimization | EMX Designer
EMX Designer provides accurate and DRC-clean results for passive component synthesis and optimization for high-frequency and high-speed IC designs.
Watch Video
EMX Designer provides accurate and DRC-clean results for passive component synthesis and optimization for high-frequency and high-speed IC designs.
Watch Video
How to measure thermal status of the system as a function of time in Celsius.
Watch Video
Today’s electromagnetic signoff and compliance analysis tools are crippled when it comes to accurate system-level modeling and can only simulate at the module or sub-module level.
Watch Video
Today's defense systems are powered by secure electronics platforms and are more complex than ever.
Watch Video
For today's datacenter, designing electronics to analyze the deluge of data presents challenges in throughput, performance, and energy. Minimizing and dissipating heat is a primary design objective.
Watch Video
An electrical system consisting of multiple power supply voltages might fail due to PDN noise. It’s critical to maintain the required current and voltage levels with least power fluctuations to ensur
Watch Video
Designers tend to place a large number of decoupling capacitors on PDNs to control impedance and EMI. But unplanned numbers and placement might lead to over design and overshoot your budget.
Watch Video
EM interference is critical for any system whether it’s a smartphone or a spacecraft. It doesn’t happen just between the signal or PCB components, but it can also occur from connectors, antennas, etc.
Watch Video
With increased design complexity and miniaturization, it's critical to understand the thermal behavior of the system. Massively parallel architecture of Celsius thermal solver delivers ...
Watch Video
To ensure the thermal stability of your design it’s required to predict all the heat sources earlier in the design cycle. Active components and power sources are the main contributors of heat.
Watch Video
How to extract highly accurate S-parameter models for SI, PI and EMC analysis to ensure design reliability. Learn more about Clarity 3D: https://www.cadence.com/en_US/home/tools/system-analysis/em-s
Watch Video
Predicting the thermal effects of your ICs, packages, PCBs and systems is critical for ensuring design reliability.
Watch Video
Utilize the pre-configured 5G NR test benches in VSS to measure and display functional specifications.
Watch Video
Reduce the time spent simulating test benches required to do a proper design exploration with sweeping or optimization, or when performing electrical verification with APLAC Turbo.
Watch Video
Use AWR’s dynamic measurement and source controls to create centrally managed design-review-ready data displays quickly.
Watch Video
Ensure that the RF section of your PCB is performing as expected by utilizing the PCB Import and EM verification flow.
Watch Video
AWR has a variety of easy-to-setup stability analysis techniques available to the designer for use both in design and electrical verification to prevent blown tape-outs caused by instabilities.
Watch Video
Use measured, or simulated load/source pull and load-pull visualization capabilities of AWR to quickly choose the optimum load/source impedances.
Watch Video
With CFD simulation, you can analyze the heat transfer between solids and external flows.
Watch Video
How to perform thermal and ET co-simulation for the system in Celsius
Watch Video
Loading More...