RF Cans Improve Electromagnetic Compatability in PCBs
Learn why RF shielding, particularly the use of RF cans, is so essential to electromagnetic compatibility in PCB designs.
Read Article
-
-
3D-ICs and the Importance of Heat Transfer Models
Learn more about the two techniques used for developing heat transfer models of 3D-ICs.
Read Article
-
The Temperature Dependence of the Resistivity of Semiconductors
Learn more about the temperature dependence of the resistivity of semiconductors and how this dependence impacts their application in electronic devices.
Read Article
-
Using PCB Thermal Simulation in the Pre-Development Design Phase
The impact of heat on PCB performance, reliability, and efficiency is significant, making it necessary to run PCB thermal simulations of design layouts to ensure electronic product designs are optimiz
Read Article
-
Shorten Design Cycle Time Using 3D EM Simulation Software
Before physical prototyping, model, analyze, and optimize EM designs with 3D EM simulation software.
Read Article
-
FEA/CFD Analysis for Fluid-Structure Interaction Studies
FEA/CFD analysis is a software-based simulation tool that can be used to enhance the performance, reliability, and safety of engineering designs.
Read Article
-
The Effect of the Linear Coefficient of Thermal Expansion of Thermal Barrier Coatings
The four layers in TBCs are different in chemical, mechanical, and thermal properties. Different TBC materials possess different linear coefficients of thermal expansion.
Read Article
-
EFT Testing for Electronic Systems
To check whether an electronic system is immune to EFTs, routine EFT testing must be conducted. Read on to understand how to conduct EFT testing and why it is so important.
Read Article
-
Advantages of SiC Thermal Shock Resistance
Due to its high thermal shock resistance, low thermal expansion, and high thermal conductivity, SiC is a popular ceramic in the industry.
Read Article
-
Applying the Optimal Power Flow Model to Your PDN
Optimal power flow is a cost minimization model that can be applied to high-level PDN design.
Read Article
-
Improve Product Design with Accelerated Life Testing Thermal Cycling
Accelerated life testing thermal cycling quantifies the life characteristics, failures, and defects that occur when products are employed in the field.
Read Article
-
Heat Transfer Simulator for Analyzing Thermal Effects
In electronic circuit systems, heat transfer negatively impacts performance. The investigation of heat transfer using simulation is helpful to design effective thermal management.
Read Article
-
Today's and Tomorrow's Terahertz Microcavity Resonators
Terahertz microcavity resonators are a critical part of on-chip microwave photonics. Here’s how these components will fit into the photonics landscape.
Read Article
-
Power System Interharmonics Show That No Power System Is Perfect
Power system interharmonics need to be filtered or suppressed in your AC system. Here’s how you can produce clean AC input power for your products.
Read Article
-
Incorporate a Power Management System for Reliable and Stable Electrical Power Supply
Achieve a reliable and stable power supply in industrial and commercial electrical networks with a power management system.
Read Article
-
How PDN Transient Current Dynamics Affect DC Power
The PDN transient current dynamics affect DC power from ground and supply rails.
Read Article
-
Describing Harmonic Motion in Linear and Nonlinear Circuits
Harmonic motion is more complicated than sinusoidal oscillations. Here’s how complicated oscillations arise in linear and nonlinear circuits.
Read Article
-
Improve Power Factor and Efficiency Using Bridgeless Power Factor Correction Rectifiers
Replace diode bridge rectifiers using bridgeless PFC rectifiers to improve power factor and efficiency.
Read Article
-
Demystifying Maximum Power Output Concepts
The maximum power transfer theorem can explain the relationship between two different—but related—concepts: maximum power output and maximum power efficiency.
Read Article
-
Innovations in Wideband RF Signal Processing
Wideband (WB) RF signal processing provides industry-standard performance and enables Giga Samples Per Second (GSPS) data transfer rate, zero loss, good quality, and high-performance in systems.
Read Article
-
Loading More...