Interpreting Electrochemical Impedance Spectroscopy Measurements
You can get a full view of electrochemical cell kinetics with electrochemical impedance spectroscopy measurements.
Read Article
You can get a full view of electrochemical cell kinetics with electrochemical impedance spectroscopy measurements.
Read Article
Terahertz microcavity resonators are a critical part of on-chip microwave photonics. Here’s how these components will fit into the photonics landscape.
Read Article
Here’s a Nernst equation example for electrochemical systems designers.
Read Article
Thermal hysteresis creates permanent changes in the output voltage from a precision reference voltage circuit.
Read Article
Capacitor impedance is the active resistance of an electrical circuit or component to AC current.
Read Article
Harmonic motion is more complicated than sinusoidal oscillations. Here’s how complicated oscillations arise in linear and nonlinear circuits.
Read Article
This article is your PDN design guide to some of the potential problems and their solutions when designing an effective power delivery network on your PCB.
Read Article
A look into S-parameter simulation, and discussion on how these parameters can help maintain signal integrity in RF circuits.
Read Article
The use of hysteresis with comparators provides increased stability and functionality, which is essential for their proper function in various circuit types.
Read Article
Hysteresis loss in a transformer produces heat and decreases power conversion efficiency. Read more to learn about hysteresis and other loss sources.
Read Article
Try using an RC phase shift oscillator circuit in your next design if you need to generate a clean sine wave.
Read Article
The use of thermal relief in circuit design is critical to the design process and it affects performance, functionality, and lifecycle.
Read Article
Is thermal paste needed for your board’s assembly can be determined by following the checklist we provide in this blog.
Read Article
Heat sink CFD simulations give the aerodynamic profile of a system, which helps the designers address thermal problems through heat sink geometry optimization.
Read Article
Coupling capacitance is one parasitic element that causes signal bleed between different circuits. Here’s how to model and extract coupling capacitance.
Read Article
Controlling crosstalk is one of the most important aspects of signal integrity. Here’s how you can use Allegro’s post-layout analysis tools to examine crosstalk in your PCB.
Read Article
A Steady State Thermal Analysis provides insight into a device’s functionality and performance under extreme thermic conditions.
Read Article
This overview of DDR routing is full of recommendations for your next PCB design involving memory routing.
Read Article
IPC Class 2 and Class 3 products may require thermal shock reliability testing. Here’s how to make your board reliable in high-temperature environments.
Read Article
Thermal cycling resistance means you need to prevent conductors from fracturing as a board operates. Here’s how you can ensure reliability.
Read Article
Loading More...