Rapid Demo of Serial Link Model Generation using 3D-EM - Part1

-0001-11-30T00:00:00

Rapid demonstration of the step-by-step process for generating S-parameters model of a serial link interface connected with vertical ports and viewing the 3D electric and magnetic field distribution in the polygon geometry consisting of the serial link interface, using the 3D-EM tool.

Rapid Demo of Serial Link Model Generation using 3D-EM - Part1

How to Use a Guard Ring in a PCB

CMOS Noise Margin Values

Matching Thermal Measurements to Simulations

Power Supply Control Loop Transfer Function Construction

How Selective Harmonic Elimination is Used in Circuits

Embedded Systems With Generative AI Will Soon Be Real

When to Use a Lookup Table in a Microcontroller

The Concept of Portability in AI Apps and Hardware

Group Delay Engineering in RF Filters

Phase Delay vs. Group Delay: What's the Difference?

What Simulations Are Needed for Chip Packaging?

How Long Does a Trace Taper or Teardrop Need to Be?

3 Ways to Extract DUT S-Parameters

What Could Cause a Solder Joint to Crack?

What ASIC Package Size is Needed to Get Past 224G?

Will Skip-Layer Routing Work Past 56 GHz?

Three Electronics Cooling Options in Your Enclosure

Configuration Signal Edge Rate and Filtering

How Electronic DC Loads Work

Working Fluids In Heat Pipes