Design of a BAW Quadplexer Module
This application note describes the design of a carrier aggregation (CA) bulk acoustic wave (BAW) quadplexer module for the LTE-3 and LTE-7 bands, with high in-band and cross-band isolation.
Read Flipbook
AWR Application Notes
This Stream includes all of our AWR Application Notes Flipbooks
-
-
LTCC Transmit/Receive X-Band Module with a Phased Array Antenna
This “how-to” application note describes the steps to design a TX/RX module with a 2x2 phased array antenna operating in the 8-12GHz frequency range
Read Flipbook
-
EM Verification of Complex Board Structures
This application note highlights the PCB import wizard capabilities that enable designers to isolate/characterize critical traces within multi-layer configurations to streamline EM verification.
Read Flipbook
-
Isolating and Characterizing Critical Traces Using EM Analysis
Virtuoso RF Solution/AWR AXIEM EM simulator enables designers to perform EM analysis to isolate/characterize critical traces within complex multi-layer configurations of today’s modern applications.
Read Flipbook
-
Design and Implementation of a Miniature X-Band Edge-Coupled Microstrip Band Pass Filter
Virtuoso RF Solution/AWR AXIEM EM simulator enables designers to perform EM analysis to isolate/characterize critical traces within complex multi-layer configurations of today’s modern applications.
Read Flipbook
-
Design of MIMO and Phased Array Antenna Systems
This application note discusses these trends and presents recent advances in EDA tools for phased-array-based systems.
Read Flipbook
-
Design of a HighEfficiency Broadband GaN HEMT Doherty Amplifier for Cellular Transmitters
This application note describes the design of an innovative Doherty amplifier architecture using 200-W high-efficiency broadband 1.8-2.7 GHz GaN HEMT technology.
Read Flipbook
-
mmWave Automotive Radar and Antenna System Development
This application note demonstrates how the radar design capabilities within VSS software can be used to design mmWave radar systems and antenna array technologies for ADAS applications.
Read Flipbook
-
Ensuring Accurate Broadband EM Analysis with Allegro PCB Designer
This application note outlines the electromagnetic (EM) simulation and verification flow between the Cadence Allegro PCB Designer and Cadence AWR Design Environment platform for a PCB design.
Read Flipbook
-
Using Parallel and Remote Schematic Simulation and Optimization to Reduce Design Time
This application note overviews the options for high-performance electromagnetic (EM) computing for circuit simulations based on remote and parallel simulations.
Read Flipbook
