Fill form to unlock content
Error - something went wrong!
Free Whitepapers from Experts in the Field
In key electronics applications such as data centers, automotive, and 5G, the data speed and volume are increasing at an exponential rate. Data centers require data transmission as high as 112Gbps, which can be achieved only using PAM4 signaling. The automotive industry is dealing with the challenges of transferring data between various electronic control units (ECUs) at a very high data speed reaching gigabits per second, mostly on two pairs of wires, while struggling to manage the impedance. In 5G, the quantum of data that must be processed at the edge nodes and the data centers is massive. The devices must be equipped to deal with these speeds and to make control decisions in a timely fashion.
One of the critical challenges the semiconductor industry is facing is to maintain the data integrity as the demand for bandwidth increases, straining the bandwidth of existing cloud data center server, storage, and networking infrastructure. The primary workhorse technologies for these bottlenecks are system-level signal and power integrity (SI/PI), which require modeling and simulation of the various pieces of interconnect that are used before the system is fabricated. One example is power delivery across the full system, typically through high-speed connectors and cables, which requires interconnect modeling and simulation and sets the need for a next-generation 3D field solver. These challenges are no longer a single board problem or a single package problem but a problem for the entire Rigid-Flex design.
Whether you're looking to improve your data processing speeds, or have specific transmission uses in mind like 5G data improvements, pull data, or product data management, ensure your transmission integrity with Clarity. Data simulation and data flow analysis are going to continue being pivotal functions within tools moving forward as transmission speeds get pushed to 5G LTE and 6G speeds.