Track 1: Keynote and Industry Insights
f
Active and Passive Matching in RF PAs
Dr. Steve C. Cripps, Cardiff University
f
Instability in Wide Bandwidth High PAs
Dr. Dominic FitzPatrick, Ametek-CTS
f
Enhanced Design Flow for Cavity Combline Filters
Dan Swanson, DGS Associates
f
RF/Microwave Design in Teaching
Dr. Zoya Popovic, University of Colorado
Track 2: Semiconductor Technology and Modeling
f
Wolfspeed RF Device Modeling
Dr. Yueying Liu, Wolfspeed, A Cree Company
f
Gallium Nitride-on-Silicon Carbide at High Frequencies
Eric Leclerc, UMS
f
5G High-Power and Low-Noise Applications
Julien Poulain, OMMIC
f
Coupled Effect Between Antenna Arrays and Front Ends
Wissam Saabe, AMCAD Engineering
Track 3: PA and Front-End Design
f
HPA Design for Satellite Communications
Thomas Young, Arralis and David Vye, Cadence
f
MMIC PA Design
David Vye, Cadence
f
Input and Output Controlled High-Efficiency PAs
Vince Mallette, Focus Microwaves
f
Doherty PA Design from Load-Pull Derived Enhanced Polyharmonic
Distortion (EPHD) Models
David Vye, Cadence
Track 4: EM Analysis and Design Optimization
f
Best Practices for EM Simulation
Dr. John Dunn, Cadence
f
Tips and Tricks for Silicon RFIC Designs
Dr. John Dunn, Cadence
f
Designing a Narrowband 28GHz Bandpass Filter for 5G
David Vye, Cadence
Track 5: Communication/Radar System Simulation
f
Phased-Array Antenna Simulation for 5G
Steve Tucker, Cadence
f
RF Link Budget Analysis Using VSS
Joel Kirshman, Cadence
f
Phase Noise Modeling Using VSS
Joel Kirshman, Cadence
4 www.cadence.com/go/awr