AWR eBooks

RF Electronics: Design and Simulation

Issue link: https://resources.system-analysis.cadence.com/i/1325428

Contents of this Issue

Navigation

Page 211 of 406

RF Electronics Chapter 6: Oscillators Page 198 2022, C. J. Kikkert, James Cook University, ISBN 978-0-6486803-9-0. The resulting Microstrip layout is shown in figure 6.43, with the oscillator output at the top, the supply voltage pad at the left and the largest element being the resonator. The resonator is shown slightly lighter, since that is a separate element in the layout. The only elements not shown on this layout are the power supply biasing and vias connecting the ground pins of the MAR to the ground-plane. Figure 6.44 shows the corresponding hardware. Figure 6.44. Photograph of the 1 GHz oscillator. b Figure 6.45. Measured output spectrum for the 1 GHz oscillator. RF Electronics: Design and Simulation 198 www.cadence.com/go/awr

Articles in this issue

Links on this page

view archives of AWR eBooks - RF Electronics: Design and Simulation